Stainless Steel Feeler Gauge Set (0.02-1.00mm, 17 Blades) for Engine & Automotive
12 sold in last 24 hours
- Reliable Material: The are made of 65 manganese steel, while the housing is made of stainless steel, which is not easy to break or deform, in addition, the stainless steel feeler gauge has anti-rust oil to avoid rust, and the feeler gauge is clearly engraved Dimension numbers for easy reading and identification
- Feeler gauge set: Each measuring feeler gauge has 17 blades thickness; Foldable feeler gauges, easy and convenient to take and store
- Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00
- Easy to use: The steel feeler gauge measuring tool is flexible and can easily access places that are difficult to reach with other utensils, the blades can be kept together, or you can unscrew the finger nut and take out the feeler gauge you need, simple and convenient for various scenarios, such as Set up lifts, spark plugs, point spaces, and more
- Warm notice: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that
Tags |
Estimated shipping
Select a product to estimate shipping.Welcome to my shop. Have a nice shopping.
High Precision
Features high precision, dual marked metric and imperial, the numbers of size are etched into feeler gauge for easy identification
High Quality Steel
Constructed from high quality stainless steel, which has high breaking strength(resistance)
Polished Blades and Anti-rust Oil
Polished blades for preventing scratches, and lube oil prevent burr to hurt your hands, prevent pitting and corrosion, meanwhile making moving the blade more smoothly
Warm Notice:
There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Detachable Blades
Steps to follow while using the feeler gauge:
1.Unfolding of the Blades – Before using the feeler gauge, you need to remove and unfold the blades from the case.
2.Selection of leaf – Always try to select the leaf that is approximately the same width as that of the gap that you wish to measure.
3.Close back the other leaves – The system of the tool is such that the individual tool leaf can be used. To avoid bending of the other non-operated leaves, they must be folded away while measuring the gap.
4.Proper holding of the gauge – You should hold the gauge in the same manner as you hold the pen knife or multi-tool between your thumb and forefinger. You can measure the gap by adding more than one leaf at a time for extra accuracy. A small leaf of 0.02 mm can be added along with the large leaf.
5.Be tender – Be aware of the force implied on the blades as if the blades are of thinner thickness, then they might bend when pushed into a gap.
6.Feel for a frictional resistance – There is a need for a certain type of frictional resistance while sliding the blade through the gap. It is never recommended to force the feeler gauge into the gap. It might damage the blade of the gauge while measuring the item. It might sometimes happen that the gauge might be stuck in the gap that you are trying to measure. Thus, you can always initiate a slightly thinner gauge blade. In case the gap is larger than the blade, and there is no resistance to a thicker gauge, then you can add additional blades until the resistance feel is correct. There is a need for multiple measurements to confirm the exact size of the gap.
7.Testing of gauge for measurement – When you achieve the proper friction at that time, you will get the correct gap measurement. (It's necessary to correctly implement the tool whenever it is used to get accurate results. )
Wide application:
Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps and other hard to reach places.
Please clean up the machine before measuring. It shouldn’t be measured when the machine has high temperature. Your action should be light and you shouldn’t insert it forcefully when measuring.
Humanized Design
Designed with a thumb notch for easy selection and expansion
Good Elasticity, Hardness, with good elasticity, it can be bent freely
Bound within a chromed-blade protector to prevent loss of individual blades, the feeler gauge can be disassembled if you want to use one alone.
1.Metal housing feeler gauge with 17 silver tone metal tapered blades of different thickness.
2.Features metric measurements marked on each blade, easy to read.
3.Flexible and blades can be stacked together when not in use.
4.A tool used to measure gap widths, mostly used in engineering to measure the clearance
between two parts.
Product Details
Specification:
Material: Stainless Steel
Blades: 17 pieces
Color: Silver
Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25 0.30,
0.40, 0.50, 0.75, 1.00
Package Included:
1 x Feeler Gauge
Notice:
There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about it.
Product details
| Main Specification | |
|---|---|
| Manufacturer | KEWAYO |
| Brand | KEWAYO |
| Number of Items | 17 |
| Range | 0.02 to 1.00 millimeters |
| Material | Stainless Steel |
| Product information | |
| Set Name | 17-piece set |
| Technical Details | |
| Part Number | VLC0-01 |
| Model | VLC0-01 |
| Material Type | Stainless Steel |
| Measurement Accuracy | +/-0.01 millimeters |
| Others | |
| Product Type | Feeler |